S1684-5H
Chicago Grip, Forged, Hot-Line, .218 to .55-Inch
- Works with Aircraft, EHS, Messenger, Guy Strand cable
- Double V inside-jaw contour
- Maximum Safe Load: 8000-Pound (3629 kg)
- Standard hot-line grips are not supplied with springs or lock-open features
- Made in USA
- Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
- Jaw length: 5-Inch
The Klein S1684-5H Chicago Grip-with Hot-Line Latch for Bare Conductors are for both bare and insulated conductors . The Klein S1684-5H Chicago Grip-with Hot-Line Latch for Bare Conductors grip may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
Specifications
Type:
Chicago Grip
Application:
Wire Pulling
Overall Length:
14.75'' (37.5 cm)
Overall Height:
8.63'' (21.9 cm)
Overall Width:
2.38'' (6 cm)
Material:
Steel
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
Y
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V
Teeth Type:
Smooth
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.7 lb (3.0 kg)
UPC:
092644471681
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
